9 10
3
System setting:
Display Mode:
There are two display modes: Digital and Graphic.
Diagram scale:
The ordinate range selection When printing the chart.
There are 4 kinds of type: 20%,50%,100% of F.S.
Key Setting:
The key “Store/Print” is a multifunction key, It can be set as "store
the current display value(Storage)" or "print the recent data
(Print)"."Storage" is default.
Maintenance
When the battery are low, the icon will be displayed. The batteries
should be charged immediately.
Connect the gauge and the charger use the USB cable, and then
connect the charger with AC socket to start charging. It takes
about 3~4 hours for fully charging.
You can also use other USB device (e.g. Laptop PC) to recharge
the gauge.
1
2
Conversion:
N.m N.cm kgf.m kgf.cm gf.cm lbf.ft lbf.in Oz.in
N.m 1 100 0.102 10.197 10197.2 0.7376 8.8508 141.612
N.cm 0.01 1 0.001 0.102 101.972 0.0074 0.0885 1.416
Kgf.m 9.807 980.67 1 100 100000 7.233 86.7962 1388.74
Kgf.cm 0.0981 9.807 0.01 1 1000 0.0723 0.868 13.887
Gf.cm 0.0001 0.0098 0.00001 0.001 1 0.00007 0.00087 0.0139
Lbf.ft 1.356 135.58 0.1383 13.826 13825.5 1 12 192
lbf.in 0.113 11.299 0.0115 1.1521 1152.13 0.0833 1 16
Oz.in 0.007 0.7062 0.0007 0.072 72.008 0.0052 0.0625 1
To Previous Page
Loading...
