Inspire CR 2 - Page 9

120
39
139
GRIP SHIFTER
CABLE
39
120 136 137 138
125
71324
135
PAGE 9
Step 3
Attach the Push Arm (120) to the Front Vertical Linkage (125) using 4 - M8 Lock Nuts A
(7) and 4 - M8 Washers (13).
NOTE: It is recommended that an aide hold the Push Arm in position while the Lock Nuts
are installed.
Secure the Resistance Handle Cable (135) to the Cable Clips (139) on the Push Arm B
(120) using a M4 Cross Head Screw (39).
139