Inspire CS1 User Manual

12
STEP 3
a) Assemble Right Pedal (#31) onto Right Pedal Arm Assembly (#24) using qty 2 – M6
Molded Plastic Nuts (#36) and qty 2 – 4.2x6 self tapping screws (#37).
b) Assemble Right Pedal Arm Assembly (#24) onto the Right Side Crank. NOTE: THERE
IS A SPACER INSIDE THIS PEDAL ARM PIVOT. WHEN ASSEMBLING PEDAL
ARM, PLACE FINGER INSIDE TO ENSURE THE SPACER IS CENTERED. THIS
ALLOWS THE PEDAL ARM TO SLIDE SMOOTHLY ONTO THE CRANK.
Secure using qty 1 – M8x20 Bolt (#22) and qty 1 – M8 Washer (#23).
c) Assemble Left Pedal (#28) onto Left Pedal Arm Assembly (#27) using qty 2 – M6 Molded
Plastic Nuts (#36) and qty 2 - 4.2x6 self tapping screws (#37).
d) Assemble Left Pedal Arm Assembly (#27) onto the Left Side Crank. NOTE: THERE IS
A SPACER INSIDE THIS PEDAL ARM PIVOT. WHEN ASSEMBLING PEDAL
ARM, PLACE FINGER INSIDE TO ENSURE THE SPACER IS CENTERED. THIS
ALLOWS THE PEDAL ARM TO SLIDE SMOOTHLY ONTO THE CRANK.
Secure using qty 1 – M8x20 Bolt (#22) and qty 1 – M8 Washer (#23).

Inspire CS1 Specifications

General

Brand	Inspire
Model	CS1
Category	Elliptical Trainer
Language	English