Insta360 Titan - Page 229

6.1 [ Advanced ] Manual exposure and curve adjustment
Automatic exposure algorithm takes equalized exposure of overall image . It may be inaccurate to expose in certain
scenarios so that manual exposure settings can be used to shoot .
Under the mode of photographing and timelapse , there are three modes for exposure : automatic exposure , manual
exposure and isolated exposure . Two exposure modes of shutter priority and ISO priority have been newly added .
Shutter priority or ISO priority exposure mode cannot preview the e ff ect in real time . When photographing in manual
exposure mode , ISO ( 100 ~ 6400 ) , shutter ( 1 / 30 s ~ 1 / 8000 s ) and white balance ( Auto , 2700 K , 3200 K 4000 K , 5000 K , 6500 K ,
7500 K ) can be adjusted .
When recording , you can select from three modes of automatic exposure , manual exposure and isolated exposure . ISO
( 100 ~ 6400 ) , shutter ( 1 / 30 s ~ 1 / 8000 s ) , white balance ( Auto , 2700 K , 3200 K 4000 K , 5000 K , 6500 K , 7500 K ) can be adjusted
in manual exposure mode .
When using control client terminal to connect camera to shoot , you can use curve function ( similar to PS curve ) to make
real - time adjustment in each exposure part .
As an addition to exposure parameters , this function can adjust the intensity of brightness in di ff erent parts in detail .
Note that there is no need to use curve functions when shooting RAW photos or i - Log videos . Curve parameters can be
saved to camera parameter templates for later use .