7
1
Manual Blending Keys
Low / Med / High: 3 manual blending speeds
Within 5 seconds, blender will beep 3 times and begin blending
at the selected speed.
2
Temperature: Fahrenheit & Celsius
To change the displayed temperature from °F to °C:
1. Press Cancel to ensure the blender is in Standby mode.
2. Press and hold Pause for 5 seconds — blender will beep
once and display the selected temperature.
3
Pulse / Clean
Short bursts of blending, ideal to break up larger chunks of food
or for cleaning.
Within 5 seconds, blender will beep 3 times and begin blending
in short bursts. Refer to “Care & Cleaning” for more information.
4
Pause
Pauses the blending program at any time. Useful when adding ingredients
mid-program. When selected, you will see -P- on the display.
Press again to resume the program.
Note: If the lid is removed during blending, the blender will automatically
Pause the program. When ready to resume, press the Pause key again.
5
Cancel
Stop the blending program at any time.
When selected, blender will return to Standby mode and will
display "OFF".
6
Error Indicator
If the blender encounters an error, the error indicator will blink and the
error code will be displayed.
To Next Page
Loading...