Troubleshooting
valve for over 2 minutes
valve silicone seal
seal
Float valve silicone ring
worn- out or missing
silicone ring
5
6
Float valve unable to rise
Too little food or water in
inner pot
inner pot
Float valve obstructed by
the lid locking pin
Close the lid completely, see
Steam comes out from
the steam release
valve non-stop
Steam release valve not in
sealing position
Turn the steam release
handle to the sealing
position
Pressure control fails
Contact support
7
position for the selected
program
Close the lid for pressure
cooking or open the lid for
sautéing
Display remains blank after
connecting the power cord
Bad power connection or no
power
Inspect the power cord to
ensure a good connection,
check if the power outlet is
active
Cooker’s electrical fuse has
blown
Contact support
3
Steam leaks from the side
of the lid
No sealing ring
Install the sealing ring
Sealing ring damaged
Food debris attached to the
sealing ring
Clean the sealing ring
Open then close the lid
again
Problem Possible reason
Solution
To Next Page
Loading...
