Instanta 1501F - Introduction; Safety Information

CONTENTS
CONTENTS & INTRODUCTION 2
SAFETY INFORMATION 2
ENVIRONMENTAL INFORMATION & DELIVERY CHECK-LIST 3
TECHNICAL SPECIFICATION 3
INSTALLATION 3
OPERATION 4
DAILY USE 4
FILTER & FILTER REPLACEMENT 4
ADJUSTING FILTER-MONITOR (optional) 6
CLEANING 6
MAINTENANCE, SPARES & SERVICE INFORMATION 7
SERVICE / TECHNICAL SUPPORT / GUARANTEE 7
SERVICE WARNINGS & FAULT DIAGNOSTICS 8
Introduction
Dear Customer,
Thank you for purchasing this Instanta product.
Your new water boiler is designed to give you
years of trouble-free service provided that
the instructions contained in this manual are
followed.
All new series Instanta products are energy
efcient, simple to operate and easy to service.
Find out more about Instanta products at www.
instanta.com
Safety Information
Please read the following carefully before
starting work on this equipment.
A competent person should install this appliance
in accordance with the installation instructions
for this appliance and all relevant local and
national standards including the following:
• Health & Safety at Work Act
• IEE Regulations
• Local & national Building Regulations
• BS Codes of practice
• Water Supply Regulations
All personnel should be provided with sufcient
training in the safe use of this appliance. A
warning notice displayed next to the machine is
often helpful in notifying users that the appliance
contains and dispenses near boiling water.
• Inform users that certain surfaces will
become hot (especially the draw-off tap).
Care should be taken to avoid potential
injury from burns and scalding whilst
operating this appliance.
• In line with Health and Safety requirements
we recommend a risk assessment be carried
out after the boiler has been installed.
• Always disconnect the unit from the power
supply before servicing.
• The unit must be earthed.
• Keep these instructions in a safe place near
the unit for future reference.
2