InStep RIDE N STRIDE - Wheel Assembly

5
Step 3. To attach rear wheels, line up the
hole in the frame with the axle on
the rear wheel (Figure M). Then,
insert the axle through the hole
on the frame (Figure N). Then,
insert locking pin through the
hole in the axle (Figure O). Then,
lock the loop end over the other
end of the pin (Figure P and Q).
Repeat for other side of the
trailer/stroller.
M
N O
P
Q
WHEEL ASSEMBLY
Lower Frame
Locking Pin
Wheel Axle
Wheel Axle
Locking Pin
Lower Frame
Wheel Axle
Wheel Axle
Locking Pin
Locking Pin
Lower Frame