9. Gently remove the sealed sample from the chamber and immediately
transfer the sample to a large water bath equipped with scales and a
cushioned weighing basket. Completely submerge the bag in water.
Caution: Make certain the bag is not touching the sides or bottom of the
water tank.
10. Allow the scales to stabilize and record the weight in column C.
11. Remove the sealed core from the water. Cut open the bag and remove
the core. Weigh the core and record the weight in column D.
12. Hand-calculate the results or launch the GravitySuite package to
automatically calculate the results using the CoreGravity option.
To Next Page
Loading...
