THE BASICS
Preparation For All Hair Types
• Before using your InStyler, you should always
start with clean, dry hair.
• Detangle and comb.
• The hair you’ll be working with should be no
wider than the length of the InStyler barrel.
Start with 1- to 3-inch sections.
• Style the under layers of your hair first. Then,
move onto the top layers.
• Use any salon-quality styling product with
your InStyler Rotating Iron. However, we do not
recommend the use of oil-based products with
the device.
• For better hold, you can use your favorite light
styling spray before using your InStyler. Do not
use an aerosol spray.
• GO SLOWLY! Let the InStyler work its magic.
Don’t worry if you see “steam” when using the
device. This is not damage to the hair, it’s simply
excess product build-up, evaporating.
HAIR TYPES
The way you use your InStyler Rotating Iron
depends on what type of hair you have. Use the
techniques best suited to your hair type.
The three main types of hair are:
1. FINE: Set the InStyler at the Low or Medium
heat setting. With fine hair, you should only
need 1 to 2 passes to achieve preferred results.
2. MEDIUM (most common): Set your InStyler to
the Medium or High setting. You should only
need 1 to 2 passes with the InStyler for your
desired look.
3. THICK: Set your InStyler to the High or Max
heat setting. With thick hair, 2 or 3 passes
should be enough to set your style.
NOTE: For color-treated hair, we recommend both
a lightweight shampoo and leave-in conditioner.
• Volumizing products can be used to set the
style.
• To hold your look, end with a light, professional
finishing spray.
• We recommend using thermal protectant
products before use.
SECTIONING HAIR
To achieve the style you want with your InStyler,
it is important to know how to properly section
the hair.
• With longer hair, clip up the top layers and
begin sectioning and styling the under layers
first.
• For best results, do not use fingers to gather
each section of hair. You can gather a much
“cleaner” section with a sectioning comb
(included).
• Start with 1- to 3-inch sections, working
around each side of the head to the nape of
the neck. Use small sections of hair.
• When using the InStyler , grip the device
firmly but not tightly and let your hair glide
through. Go slowly and let the InStyler do
the work.
To Next Page
Loading...
