2
InStyler
®
Rotating Iron
2
IMPORTANT SAFETY INFORMATION
WARNINGS: TO REDUCE THE RISK OF SERIOUS INJURY,
READ ALL INSTRUCTIONS AND WARNINGS COMPLETELY
BEFORE USING THIS PRODUCT
InStyler Rotating Iron has been carefully engineered for both ef-
fectiveness and safety, however, basic safety precautions should
always be followed when using any product, especially when
children are present.
• INSTYLERROTATINGIRONISNOTINTENDEDFORUSEBYCHILDREN.
• KEEPAWAYFROMWATER.
• DANGER-As with most electrical appliances, electric parts are electri-
cally live even when the switch is o. To reduce the risk of electric shock:
1. ALWAYSUNPLUGITIMMEDIATELYAFTERUSING.
2. DONOT use while bathing or showering.
3. DONOT place or store InStyler Rotating Iron where it can fall or be
pulled into a tub, toilet or sink or any other water source.
4. DONOT use InStyler Rotating Iron near water.
5. DONOT place in or drop into water or other liquid.
6. If InStyler Rotating Iron falls into water, DONOTREACHINTOTHE
WATER! Unplug it immediately.
• WARNING:TOREDUCETHERISKOFBURNS,FIRES,ELECTRICAL
SHOCK,DEATH,INJURYORDAMAGETOPROPERTY:
1. Counterfeit versions of the InStyler Rotating Iron do exist. To
ensure you have purchased a genuine product, and to reduce the
risk of burns, electrical shock and malfunctions, purchase from
authorized dealers only.
2. Use InStyler Rotating Iron only for its intended use as described in
this manual. DONOT use attachments not recommended by the
manufacturer.
3. NEVER operate the InStyler Rotating Iron if it has a damaged cord
or plug, if it is not working properly, if it has been dropped or dam-
aged or if it has been dropped into water. If the power supply cord
or plug is damaged, the InStyler Rotating Iron must be replaced by
the manufacturer or an authorized service agent in order to avoid
a hazard.
4. Keep this product and the cord away from water and heated
surfaces. DONOTwrap the cord around the InStyler Rotating Iron
until unit is completely cool.
5. This product has moving parts. Children and pets should be kept
away when product is in use.