How to fix Inswan Document Camera that cannot be powered on?
If your Inswan Document Camera cannot be powered on normally, the USB cable might not be correctly connected to the computer, or the computer may have crashed. Try reconnecting the USB cable with the document camera. If the issue persists, restart your computer.
What to do if there is no image output after connecting Inswan INS-3?
If there is no image output after connecting your Inswan Document Camera, it might be due to a few reasons. First, ensure the USB cable is properly connected to the computer. If the connection is correct, confirm that the bundled software is installed on your computer. Finally, the application software you're using may be incompatible, so try using the bundled software to operate the document camera.
Why is the image fuzzy on my Inswan Document Camera?
If the image from your Inswan Document Camera appears fuzzy, it could be because the object is too close to the lens. Try pressing the AF button to auto focus. Also, ensure the distance from the lens to the subject is greater than 10 cm.
How to eliminate noises when viewing images on Inswan INS-3?
If you're experiencing noises when viewing images from your Inswan Document Camera on the computer, the flicker setting may not match your country's standard. Adjust the flicker setting in the software.
General| Brand | Inswan |
|---|---|
| Model | INS-3 |
| Category | Document Camera |
| Language | English |
To Next Page
