User's Manual No. 9999-064-0
_________________________________________________________________________________________________
_________________________________________________________________________________________________
B7250_simplex_E_01.doc Rel. 1 vom 01.07.2005 2
Attention!
After opening to begin the programming within 10 sec.
Changing the CODE (only when the electronic lock is open,
start within 10 seconds after opening the lock):
Enter the old CODE 1
Enter the new CODE 1 (example given here)
Repeat new CODE 1
Creating / changing CODE 2 (only when the electronic lock is open,
start within 10 seconds after opening the lock):
CODE 1
When changing, enter CODE 1 or 2
Enter the new CODE 2 (example given here)
Repeat new CODE 2
Deleting CODE 2 (only when the electronic lock is open,
start within 10 seconds after opening the lock):
Enter CODE 1
Cancellation during an entry
&
To Next Page
