INSYS CombiStar 7250 simplex

To Next Page

Installation Instructions No. 9999-067-0

_________________________________________________________________________________________________

_____________________________________________________________________________________________

E7250E_01.doc Rel. 1 vom 11.07.2005 1

Installation Instructions CombiStar 7250 simplex and pro

The electronic lock, together with its keypad, is to be installed in accordance with the following

instructions. It should be noted that these installation instructions are a part of the VdS security

certification; failure to follow these instructions will invalidate that certification. The electronic lock is

in all cases to be protected from tampering from the outside.

Pictorial guide to installation

Electronic lock CombiLock 7251

Distance between lock cover plate

and outside door

Keypad

7238 CombiControl

4 Machine screws

M4 x 10

3 Machine screws

M6 x 35

Attachment ring for

CombiControl 7238

Lock washers for

3 machine screws M6 x 35

Connector shaft between

CombiLock 7251 and the

CombiControl 7238 keypad

Calculating the length of the connector shaft:

43 mm + distance between lock cover plate and outside door

(Toleranz:

–

4 mm)

Need help?

Do you have a question about the INSYS CombiStar 7250 simplex and is the answer not in the manual?

Summary

Installation Instructions CombiStar 7250 simplex and pro

Pictorial guide to installation

Visual guide illustrating the components and their arrangement during installation.

Assembly sequence

Attachment ring for CombiControl 7238 keypad

Details on mounting the attachment ring for the keypad onto the safe door.

Positioning the keypad

Instructions on how to angle and rotate the keypad onto the attachment ring.

CombiLock 7251 electronic lock

Installation Procedure

Steps for connecting the keypad, attaching the lock, and securing it with screws.

Installation options

Sample installation for the CombiStar 7250 system

Illustrates a typical final setup of the electronic lock and keypad.

Important notes

Guidelines on bolt tension, lubricants, and recommended testing after use.

Summary

Installation Instructions CombiStar 7250 simplex and pro

Pictorial guide to installation

Visual guide illustrating the components and their arrangement during installation.

Assembly sequence

Attachment ring for CombiControl 7238 keypad

Details on mounting the attachment ring for the keypad onto the safe door.

Positioning the keypad

Instructions on how to angle and rotate the keypad onto the attachment ring.

CombiLock 7251 electronic lock

Installation Procedure

Steps for connecting the keypad, attaching the lock, and securing it with screws.

Installation options

Sample installation for the CombiStar 7250 system

Illustrates a typical final setup of the electronic lock and keypad.

Important notes

Guidelines on bolt tension, lubricants, and recommended testing after use.