English
Controls and Indicators
- 7 -
E. WFM Icon
The WFM Icon (E) is lighted when the WFM Radio band is selected.
F. DW Icon
The DW icon is lighted when the DW (DUAL WATCH) function has been enabled.
G. SC Icon
The SC icon (G) is lighted when the SCAN function has been enabled.
H. KEYLOCK Icon
The KEYLOCK (H) icon is lighted when the keypad lock function has been enabled.
I. M Icon
This icon indicates the Memory Mode operation.
L. BEEP Function Icon
The Beep Icon (L) is lighted when the Beep function is enabled.
M. Memory Channel Number
It indicates the selected memory channel number, total 99 memory channels are available.
N. S-RF Digital Bar Meter
The 10-bar digital meter indicates the received signal strength.
O. B Icon
The B icon (O) is lighted when the radio is receiving a signal or when Squelch is open.
P. Frequency Readout
Full 7-digit frequency readout in KHz.
6. LIGHT / BEEP Key
LIGHT
Shortly press the LIGHT (6) key to backlight the LCD display. The LCD backlight will be turned
OFF automatically after 4 seconds or press the LIGHT key (6) again to turn OFF the LCD
backlight.
BEEP Function
This feature enable a short beep tone to confirm that the radio has been turned on. To enable
or disable this feature, press the F Key (13) and the Beep Key (6). When this feature is
disables, the keypad program tone and the error beep tone will not sound. When this feature is
enabled, the BEEP Icon (I) is lighted on the LCD display (5).
To Next Page