Intel D815EEA2 Quick Reference

 *OUFM%FTLUPQ#PBSET%&&"%&1&"%&'7
BOE%&1'72VJDL3FGFSFODF
4VQQPSUFE$PNQPOFOUT
1SPDFTTPST
The Intel Desktop Boards D815EEA2, D815EPEA2, D815EFV, and
D815EPFV support the following processors:

1SPDFTTPS
5ZQF

4PDLFU
5ZQF
1SPDFTTPS
'SFRVFODZ
()[
1SPDFTTPS
'SFRVFODZ
.)[
4ZTUFN#VT
'SFRVFODZ
.)[
-$BDIF
4J[F
,#
FC-PGA 1.0 933, 866,
800EB,
733, 667,
600EB, and
533EB
133 256
Intel
®
Pentium
®
III
processors
N/A 850, 800,
750, 700,
650, 600E,
550E, and
500E
100 256
FC-PGA N/A 800 100 128 Intel
®
Celeron
™
processors
N/A 766, 733,
700, 667,
633, 600,
566, and
533A
66 128
For the latest information on processors supported by the boards, refer to the
Intel Web site at:
http://support.intel.com/support/motherboards/desktop/
.FNPSZ.PEVMFT
The three memory sockets on the boards support SDRAM DIMMs that meet the
following requirements:
x 3.3 V, 168-pin modules with gold-plated contacts
x PC100 or PC133 SDRAM
x 64 Mbit and 128 Mbit SDRAM component density
x Minimum system memory: 32 MB (based on 64 Mbit SDRAM component
density)
x Maximum system memory: 512 MB (based on 128 Mbit SDRAM
component density)
x Unbuffered single- or double-sided DIMMs
x Non-ECC DIMMs (ECC DIMMs may be used, however, they will operate
in non-ECC mode only)
x Suspend to RAM (STR) support
x Memory with Serial Presence Detect (SPD)
x Basic non-SPD support at 100 MHz only

Intel D815EEA2 Specifications

General

Brand	Intel
Model	D815EEA2
Category	Motherboard
Language	English