Intel D945GNT

Intel Desktop Board D945GNT Specification Update 7
Summary of Changes
The following table indicates the Specification Changes, Errata, Specification
Clarifications, or Documentation Changes that apply to the Intel
®
Desktop Board
D945GNT. Intel intends to fix some of the errata in a future revision of the desktop
board, and to account for the other outstanding issues through documentation or
specification changes as noted.
The following notations are used in the table:
Doc: Document change or update that will be implemented.
Plan Fix: This erratum may be fixed in a future revision of the desktop board, driver, or BIOS.
Fixed: This erratum has been previously fixed.
No Fix: There are no plans to fix this erratum.
Shaded: This erratum is either new or modified from the previous version of the document.
No. Plans Specification Changes
1 Doc Change to Section 2.8.2.3, Add-in Card Connectors
2 Doc Changes to Section 1.9.2 Audio Connectors
3 Doc Changes to Section 1.10.3.1 Intel
®
82573E/82573V/82574V Gigabit Ethernet
Controller
No. Plans Errata
1 Plan Fix Hardware Monitoring and Fan Control Could Fail and Only Run at a Maximum or
Minimum PWM for CPU Fan
2 Plan Fix Digital Noise May Affect Audio Quality When Using the Rear MIC Input on boards with
a 6-Channel (5.1) Audio Subsystem
3 Plan Fix The placement of capacitors behind PCI Express* x1 connector slot 1 may prohibit
some PCI Express x1 add-in cards from properly connecting to the motherboard
Specification Changes
1. The following note will be added to the Technical Product Specification in
Section 2.8.2.3 Add-in Card Connectors:

NOTE
Capacitors required for the audio circuitry are located within the ATX keep-out
area near PCI Express* x1 slot 1, and may limit the use of some PCI Express
x1 cards.