To Next PageTo Next Page
Need help?Do you have a question about the Intel D945GCLF2 and is the answer not in the manual?
General| Form Factor | Mini-ITX |
|---|---|
| Socket Type | LGA 775 |
| Chipset | Intel 945GC |
| Memory Type | DDR2 |
| Memory Slots | 2 |
| Maximum Memory Supported | 2 GB |
| Integrated Graphics | Intel GMA 950 |
| Audio | Realtek ALC662 |
| Expansion Slots | 1 x PCI |
| IDE | 1 |
| USB Ports | 6 |
| Rear Panel I/O Ports | VGA, PS/2 (keyboard/mouse), 4 x USB 2.0, LAN, Audio ports |
| Power Connector | 24-pin ATX, 4-pin ATX12V |
| SATA Ports | 2 |
Provides a general overview and summarizes the major features of the Intel Desktop Board.
Illustrates component locations and shows a block diagram of the board's functional areas.
Details the processor supported by the board and system memory specifications.
Explains the Intel 945GC chipset components and its integrated graphics subsystem.
Details USB ports, Parallel ATA and Serial ATA interface support on the board.
Covers legacy I/O features like serial, parallel, and PS/2, plus audio subsystem details.
Describes the LAN subsystem, hardware management, and thermal monitoring features.
Details power management implementation, ACPI states, and wake-up features.
Describes the system memory address space allocation and layout.
Provides an overview of the board's various connectors and headers.
Details back panel I/O connectors and internal component-side connectors.
Details power supply connectors and front panel header interfaces.
Explains the BIOS jumper block settings and board mechanical specifications.
Covers electrical, thermal, reliability, and environmental specifications.
Introduces the Intel BIOS, its features, and the SPI Flash memory organization.
Explains resource configuration, PCI autoconfiguration, and SMBIOS information.
Details support for legacy USB devices and procedures for updating the BIOS.
Covers BIOS recovery methods and the various boot device options available.
Provides techniques for adjusting boot speed and BIOS security features.
Explains error messages displayed by the front-panel power LED during POST.
Details audio beep codes and text error messages for system diagnostics.
Provides information on POST codes generated to I/O port 80h for error determination.
Contains general regulatory compliance information and safety standards.
Covers EU conformity statements and product ecology concerns like disposal.
Details lead-free status, RoHS compliance, and EMC regulations.
Shows product certification markings and provides battery disposal information.
