Intel Desktop Board DG965RY Product Guide
46
Connecting to the USB 2.0 Header
Before connecting to the USB 2.0 header, observe the precautions in "Before You
Begin" on page
25. See Figure 22, G on page 42 for the location of the black USB 2.0
header.
Table 11 shows the pin assignments for the USB 2.0 header.
Table 11. USB 2.0 Header Signal Names
USB Port A USB Port B
Pin Signal Name Pin Signal Name
1 Power (+5 V) 2 Power (+5 V)
3 D- 4 D-
5 D+ 6 D+
7 Ground 8 Ground
9 Key 10 No Connection
Note: USB ports may be assigned as needed.
Connecting to the Flexible Audio System
After installing the SigmaTel audio driver from the Intel
®
Express Installer driver
CD-ROM, the multi-channel audio feature can be enabled.
Figure 23 shows the back
panel audio connectors. The default connector assignments are shown in the table.
The connectors are retaskable using the audio driver interface.
Item Description
A Line in/retasking jack
B Line out/retasking jack
C Mic in/retasking jack
Figure 23. Back Panel Audio Connectors
To Next Page
Loading...
Need help?
General
