Intel Desktop Board DG965SS Product Guide
20
Hardware Management Features
The hardware management features of Desktop Board DG965SS enable the board to
be compatible with the Wired for Management (WfM) specification. The board has
several hardware management features including the following:
• Fan speed monitoring and control
• Thermal and voltage monitoring
• Chassis intrusion detection
Hardware Monitoring and Fan Speed Control
The features of the hardware monitoring and fan speed control include:
• Monitoring of power supply voltages to detect levels above and below acceptable
values
• Intel Quiet System Technology fan speed control, delivering acoustically-optimized
thermal management
NOTE
Memory must be installed in the Channel A, DIMM 0 socket to enable Intel
®
Quiet System Technology.
• Fan speed controllers and sensors integrated into the ICH8
• Thermal sensors in the processor, GMCH, and ICH8 plus an onboard remote sensor
• Thermally monitored closed-loop fan control, for all onboard fans, that can adjust
fan speed or switch the fans off as needed
Chassis Intrusion
The board supports a chassis security feature that detects if the chassis cover has
been removed. The security feature uses a mechanical switch on the chassis that can
be connected to the chassis intrusion header on the desktop board. See
Figure 26 on
page
50 for the location of the chassis intrusion header.
To Next Page
Loading...
