Intel NUC 11 Enthusiast User Manual

To remove a SO-DIMM, follow these steps:
1. Observe the precautions in "Before You Begin" on page 5.
2. Turn off all peripheral devices connected to the computer. Turn off the
computer and disconnect the power cord.
3. Remove the computer’s top chassis cover and metal plate.
4. Gently spread the retaining clips at each end of the memory socket, which
causes the module to pop out of the socket (C).
5. Holding the module by the edges, lift it away from the socket, and store it in an
anti-static package.
6. Reinstall and reconnect any parts you removed or disconnected to reach the
memory sockets.
7. Replace the computer’s cover and reconnect the power cord.

Intel NUC 11 Enthusiast Specifications

General

Brand	Intel
Model	NUC 11 Enthusiast
Category	Desktop
Language	English