Intel NUC 11 Pro Kit NUC11TNHi7 User Manual

8
NUC11TNH
User Guide – January 2021
3.0 Install and Remove System Memory
Intel NUC 11 Pro Kit NUC11TNH have two 260-pin DDR4 SO-DIMM memory slots
Memory requirements:
• 1.2V low voltage memory
• 2133/2400/3200 MHz SO-DIMMs
• Non-ECC
Find compatible system memory modules at the Intel® Product Compatibility Tool:
• Intel® NUC 11 Pro Kit NUC11TNHi3
• Intel® NUC 11 Pro Kit NUC11TNHi5
• Intel® NUC 11 Pro Kit NUC11TNHv5
• Intel® NUC 11 Pro Kit NUC11TNHi7
• Intel® NUC 11 Pro Kit NUC11TNHv7
• Intel® NUC 11 Pro Kit NUC11TNHi30L
• Intel® NUC 11 Pro Kit NUC11TNHi50L
• Intel® NUC 11 Pro Kit NUC11TNHv50L
• Intel® NUC 11 Pro Kit NUC11TNHi70L
• Intel® NUC 11 Pro Kit NUC11TNHv70L
3.1 Install SO-DIMMs
If you plan to install just one SO-DIMM, install it in the lower memory socket.
To install the SO-DIMMs, follow these steps:
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer. Turn off the
computer and disconnect the AC power cord.
3. Align the small notch at the bottom edge of the SO-DIMM with the key in
the socket.

Intel NUC 11 Pro Kit NUC11TNHi7 Specifications

General

Brand	Intel
Model	NUC 11 Pro Kit NUC11TNHi7
Category	Computer Hardware
Language	English