Intel NUC 13 Pro Kit - Install and Remove System Memory; Install SO-DIMMs

8
NUC13ANH and NUC13LCH
User Guide – May 2023
3.0 Install and Remove System Memory
Intel® NUC 13 Pro Kit NUC13ANH has two 260-pin DDR4 SO-DIMM memory slots
Memory requirements:
• 1.2V low voltage memory
• 2400/2666/3200 MHz SO-DIMMs
• Non-ECC
• Up to 64GB of system memory supported with 2 SO-DIMMs using 32GB
memory modules
Find compatible system memory modules at the Intel® Product Compatibility Tool:
• Intel® NUC 13 Pro Kit NUC13ANHv7
• Intel® NUC 13 Pro Kit NUC13ANHi7
• Intel® NUC 13 Pro Kit NUC13ANHv5
• Intel® NUC 13 Pro Kit NUC13ANHi5
• Intel® NUC 13 Pro Kit NUC13ANHi3
• Intel® NUC 13 Pro Kit NUC13L3Hv7
• Intel® NUC 13 Pro Kit NUC13L3Hi7
• Intel® NUC 13 Pro Kit NUC13L3Hv5
• Intel® NUC 13 Pro Kit NUC13L3Hi5
• Intel® NUC 13 Pro Kit NUC13L3Hi3
3.1 Install SO-DIMMs
If you plan to install just one SO-DIMM, install it in the lower memory socket.
To install the SO-DIMMs, follow these steps:
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer. Turn off the
computer and disconnect the AC power cord.