14
Using the Touchpad/Clickpad
The touchpad / clickpad is a rectangular electronic panel located just below your
keyboard. Clicking twice within the 15mm x 15mm corner in the top left will
enable or disable (lighted indicator) touchpad functionality. You can use the
static-sensitive panel of the touchpad / clickpad and slide it to move the cursor.
Press the left and right bottom corners located on the bottom edge of the
touchpad / clickpad to make selections and run functions. These two buttons
are similar to the left and right buttons on a mouse. Tapping on the touchpad /
clickpad produces similar results.
x2
LEFT RIGHT
Touchpad/Clickpad
Use these bottom corners
similar to mouse buttons
Click twice here to enable
or disable the touchpad
To Next Page
Loading...
