Intel NUC11ATKPE User Manual

11
NUC11ATKPE, NUC11ATKC4, NUC11ATKC2
User Guide - January 2022
If you’re installing a 42mm M.2 SSD:
1. Remove the small silver screw from the metal standoff on the motherboard.
2. Move the standoff from the 80mm position to the 42mm position.
3. Align the small notch at the bottom edge of the M.2 card with the key in the
connector.
4. Insert the bottom edge of the M.2 card into the connector.
5. Secure the card to the standoff with the small silver screw.

Intel NUC11ATKPE Specifications

General

Brand	Intel
Model	NUC11ATKPE
Category	Computer Hardware
Language	English