Intel P45 - Integrated Peripherals; Onboard Sata Function

37
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
System BIOS Cacheable
Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in
better system performance. However, if any program writes to this memory area, a system
error may result. The settings are: Enabled and Disabled.
3-7 Integrated Peripherals
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
Item Help
> Onboard SATA Function Press Enter
> Onboard Device Function Press Enter
> Onboard Super IO Function Press Enter
PWR status after PWR Failure Always Off
Init Display First PCI Slot
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Onboard SATA Function
Please refer to section 3-7-1
Onboard Device Function
Please refer to section 3-7-2
Onboard Super IO Function
Please refer to section 3-7-3
PWR Status after PWR Failure
The Settings are: Former Status, Always On and Always off.
Init Display First
This item allows you to decide to activate whether PCI Slot or PCI Express first. The
settings are: PCI Slot, PCIExpress.
3-7-1 Onboard SATA Function
Phoenix – AwardBIOS CMOS Setup Utility
Onboard SATA Function
Item Help
SATA Legacy Mold Support Disabled
Menu Level >>
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
SATA Legacy Mold Support
This setting allows you to enable/disable SATA Legacy Mold.