Intelbras AMT 8000 - Page 57

57
6.4. Functions of Remote Control Keys
The buttons on the XAC 8000 controls come out of the factory with the following
functions:
» Button 1: arm (function 02).
» Button 2: disarm (function 03).
» Button 3: disabled (function 00).
With the following command and indicative table it is possible to change the
function of each remote control keys.
Note: some functions listed below are also associated with specic permissions
as password permissions.
Use the following table to ll in the Function eld to dene functions for the
remote control keys.
00 Disabled
01 Atv/Dtv all partitions
02 Only activates all partitions
03 Only deactivates all partitions
04 Atv/Dtv all partitions in Partial mode (stay)
05 Arm only in Partial mode (stay)
06 Panic with siren
07 Silent panic
08 Fire panic
09 Medical emergency
10 N/A
11 Atv/Dtv only Partition 1
12 Atv/Dtv only Partition 2
13 Atv/Dtv only Partition 3
14 Atv/Dtv only Partition 4
15 Atv/Dtv only Partition 5
16 Atv/Dtv only Partition 6
17 Atv/Dtv only Partition 7
18 Atv/Dtv only Partition 8
19 Atv/Dtv only Partition 9
20 Atv/Dtv only Partition 10
21 Atv/Dtv only Partition 11
22 Atv/Dtv only Partition 12
23 Atv/Dtv only Partition 13
24 Atv/Dtv only Partition 14