61
Description Message group User, device or zone
Name of the alarm center 1 00
Users 2 00 to 99
Zones 3 01 to 64
Partitions 4 01 to 16
Keyboards 6 01 to 16
Sirens 8 01 to 16
After entering the command, the sequence entered will appear on the rst line
of the displayand the previously programmed message on the second. To edit
the message, place the cursor in the desired position, use the arrow keys and
successively press the desired key until the letter, character or number appears in
the display.
To delete a digit press the
Back
key and to cancel the operation hold down the
Back
key for 3 seconds or press the
Exit
key.
To conrm the change of message, press the
Enter key.
Resetting the messages
To return all messages scheduled for display, type:
+
1 Deactive
+
Enter
+
Enter
Panic
key
If the
Panic
key is pressed for 3 seconds, the siren will be activated and the audible
Panic event will be reported to the monitoring company.
This key can assume the following settings:
Function Selection
Disabled 0
Audible panic 1
Silent panic 2
Fire panic 3
Medical emergency 4
To program this function, type:
+
540
+
Enter Selection
+
0 to 4
table above
Enter
To Next Page
