Intelbras ONU - ONU Holder Component Identification; Installation Procedures; Attaching Holder to Wall

6
1.2. ONU Holder Details
1
2
3
5
4
2
3
1. ONU holder latch
2. Place to pass the power cable;
3. Place to pass the network cable;
4. Rosette;
5. Slots for plastic cable ties.
2. Installation
2.1. Attaching the Holder to the Wall
1. The Intelbras ONU Holder can be fixed to the wall in two ways. Using good
quality double-sided tape or with screws. The fixing accessories are not included
with the product.
2. For double-sided tape attachment, use the spaces at the back of the holder´s
base to stick the tape.