Intelbras Tok Facil - Functions; Storing Numbers in Memory; Redial and Pause

23
Functions
Storing a number in the memory
There are two types of memories:
Direct memory - M1, M2 and M3 keys
This configuration will let you store the 3 most frequently dialed numbers.
1. Lift the handset (OFF-HOOK);
2. Press the STORE key;
3. Enter the number;
4. Press one of the memory buttons (M1, M2, M3);
5. Finally, put the phone ON-HOOK;
6. Now you can dial the stored number by pressing the respective memory key
M1, M2 or M3.
Indirect memory – Numerical keys (0, 1, 2, 3, ..., 9)
1. Lift the handset (OFF-HOOK);
2. Press the STORE key;
3. Enter the number;
4. Press the MEM key and then press a numerical key of your choice;
5. Finally, put the phone ON-HOOK;
6. Now you can dial the stored number by pressing the MEM key followed
by the numerical key (0, 1, 2, 3, ..., 9).
Important: we recommend the use of the batteries to store the numbers in
the memory. This will avoid losing the registry of the numbers; in case there
is a failure with the telepohone line, the disconnection of the phone for repair
or if there are many phones connected to the same line.
Redial and pause
The REDIAL/ key has two functions:
Redial
You can redial the last number you have called. To do so, lift the handset
(OFF-HOOK), press the REDIAL/ key and wait for the call.