122
· Search Step: set increment step size.
· Type 1 & Type 3 (Search 1 & 3) Range: set Search 1 & 3 search
range. Search 3 is conducted in a two-axis pattern consisting of
alternate movements in azimuth and elevation as it forms an
expanding square.
· Type 2 (Search 2) Range: is reserved for future use.
- Blockage Zone
Displays current blockage zones by azimuth and elevation sectors. Up to 5 block-
age zones can be programmed. Once the blockage zone is created, a blue shad-
ing area will be displayed in the Antenna UI view on the right.
- Threshold Settings
· DVB Detect Level: displays and sets signal detection threshold
level when DVB tracking MENU is in use.
· DVB Tracking Level: displays and sets signal tracking threshold
level when DVB tracking MENU is in use.
· NBD Detect Level: displays and sets signal detection threshold
level when NBD tracking MENU is in use.
· NBD Tracking Level: displays and sets signal tracking threshold
level when NBD tracking MENU is in use.
· TX Enable Threshold: displays and sets TX enable threshold.
To Next Page
Loading...
Need help?
General