88
DVB VERIFY SKEW OFFSET
DVB DECODE +0.0
6. Edit satellite DVB VERIFY* method and SKEW OFFSET.
DVB VERIFY will be only activated and applied when DVB mode of TRACKING SIGNAL is
chosen to be used. Press UP and DOWN arrow keys to select DVB VERIFY and press OK
key to set the parameter.
DVB VERIFY*
• AGC – use signal level for satellite tracking.
• DVB Lock – use DVB Lock for satellite tracking.
• DVB Decode – use DVB Decode for satellite tracking.
• DSS Decode – use DSS Decode for satellite tracking.
SELECT LOCAL TRACK SIGNAL
05150MHZ NBD
7. Set SELECT LOCAL* frequency and TRACKING SIGNAL*.
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to select the LNB local frequency from the installed LNB.
RX POL TX POL
HORI. VERT.
8. Set RX POL and TX POL
To select the polarity for both RX (receive ) and TX (transmit ).
Press UP and DOWN arrow keys to select VERTICAL, HORIZONTAL, RHCP, or LHCP.
Press OK key to set the parameter.
DVB verifiy method
Set polarity
Set LNB local frequency
TRACKING SIGNAL*
• NBD
• DVB
To Next Page
Loading...
Need help?
General