Need help?Do you have a question about the Intellian v80G and is the answer not in the manual?
Provides a detailed overview of the Intellian v80G VSAT system.
Highlights key features like Gyro-Free Search, DVB-S2 decoding, Wi-Fi connectivity.
Illustrates the necessary components and connections for system setup.
Details the components included in the Intellian v80G system package.
Covers site selection, radiation hazards, and cable planning for optimal installation.
Covers the process of unpacking and preparing the antenna for mounting.
Details two methods for mounting the ACU: 19" Rack Mount and Table Mount.
Explains how to connect the ship's gyrocompass to the ACU for heading input.
Explains how to establish data communication between a PC and the ACU via TCP/IP.
Guides users on setting up Wi-Fi connectivity between a PC and the ACU.
Introduces the section on setting up the system using the ACU.
Describes the sequence of events when the ACU is powered on in normal operation.
Explains how to enter and exit the ACU's SETUP mode for configuration.
Guides through initial setup of satellite, latitude, longitude, and gyro type.
Covers manual satellite search and saving current satellite information.
Details how to load satellite information for tracking.
Guides on setting LNB local oscillator frequency for different voltage powers.
Introduces Intellian's Aptus PC controller software and its benefits.
Provides instructions on how to install the Aptus software on a PC.
Explains how to set up communication between the PC and ACU for the Aptus software.
Details the functions and buttons available in the Aptus software toolbar.
Shows a dashboard for monitoring antenna status, transmission, GPS, and software info.
Lists and describes the seven pre-constructed Work View Tabs available in Aptus.
Introduces the Aptus Web software for remote monitoring and control.
Guides on logging into the ACU via the Aptus Web interface.
Displays dashboard and information menus for quick monitoring of antenna status.
Covers web-based settings for ship info, GPS, bow offset, heading, and blockage.
Details the process for upgrading antenna and ACU firmware.
Covers network settings, system logs, and browser configuration.
Provides instructions for downloading and installing Java for log download functionality.
Lists regulatory compliance standards for the product.
Provides physical measurements of the antenna unit and ACU.
Specifies the weight of the antenna unit and ACU.
Details key performance metrics like frequency, gain, and stabilization.
Describes the specifications of the ACU when mounted in a rack.
Specifies the operating temperature range for the equipment.
Outlines humidity and heat resistance standards.
Details vibration resistance specifications according to DNV standards.
Specifies shock resistance requirements for operational and survival conditions.
States the water ingress protection rating (IPX6).
Defines the salt mist resistance and storage period.
To Next Page
General