- 90 -
Authentication: Most SMTP servers require that the client authenticates
properly prior to accepting e-mail delivery. Unless your
SMTP server does not require authentication, this option
should be enabled.
SMTP: When this option is activated, the camera will submit
a user name and password to the SMTP server for
authentication. Type in a valid user name and password in
the fields below.
POP before SMTP: If your SMTP server uses this
authentication method, you also need to provide the
address of the incoming e-mail (POP) server.
Recipient e-Mail address:
Enter the e-mail address where you want the camera to
send the videos and pictures.
Administrator e-Mail address:
This is the e-mail address that the camera uses as its
“from” address. You should fill out this field (e.g.,
mycamera@mydomain.com), because some SMTP servers
will not deliver e-mail from clients that have no “from”
address specified.
Attached file type: Select snapshot if you want the camera to send single
images (JPEG format). Selecting “video clip” instructs the
camera to send short video clips in length of max. 5
seconds. This option is only available in certain models.
Subject: Define the subject of the e-mail message here.
Message: Enter the message body of the e-mail.
Click “OK” to save the settings. When
done, click “Test” to verify the e-mail
settings. A popup window will open
that informs you whether or not the
test was successful.
To Next Page
Loading...
