EasyManuals Logo

Inteno FG101 User Manual

Inteno FG101
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
FG101 User’s Guide
1
1 Introduction
Congratulations on becoming the owner of the FG101, Ethernet IAD. You will now be
able to access the Internet using your high-speed connection.
The FG101 is an IAD integrating wireless, VoIP, and Ethernet interfaces into one
device which provides the most flexibility and efficiency way to you. You could
connect devices like PCs, Set-Top-Box, servers, phone and so on easily by Ethernet,
wireless, and VoIP interfaces to enjoy data, voice, and video services immediately
through high speed connection.
This User Guide will show you how to connect your FG101 Ethernet IAD and how to
customize its configuration to get the most out of your new product.
Features
The list below contains the main features of the device (FG101) and may be useful to
users with knowledge of networking protocols. The chapters throughout this guide will
provide you with enough information to get the most out of your device.
The features include:
Ethernet interface automatic speed-sensing and crossover correction supports
up to 100 Mbps downstream and 100 Mbps upstream rates
Integrated four-port 10/100BaseTX Ethernet switch with speed-sensing and
crossover detection automatically
802.11b/g WLAN supports up to 54 Mbps transmission rate
Provides wireless secure transmitting encryption by either 802.1x; WEP; WEP2;
WPA; WPA2; TKIP; AES; 802.11i
Supports 2 FXS ports for VoIP application including call waiting, call forward, call
transfer and so on
Support voice CODECs like G.711, G.726, G.729AB, BV16, ILBC, T.38 etc.;
programmable G.168 echo cancellation, adaptive jitter buffer and packet loss
concealment
Supports Voice activity detection (VAD), comfort noise generation (CNG) and
caller ID
Supports DTMF tone detection and generation; Fax / Modem detection and
pass-through
Support SIP signaling protocol and bonus services like call forwarding, call
waiting, call transfer, call busy, call return, enquiry service, CLIP/CLIR and three
way conference
Support Networking protocols such as PPP, Routing, DHCP server / relay / client
Network address translation (NAT) functions to provide security for your LAN and
multiple PCs surfing Internet simultaneously.
Configuration and management by Web-browser through the Ethernet interface
and remotely through WAN interface
Firmware Support TR-069 and TR-104
Upgradeable through HTTP / TFTP

Table of Contents

Other manuals for Inteno FG101

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Inteno FG101 and is the answer not in the manual?

Inteno FG101 Specifications

General IconGeneral
BrandInteno
ModelFG101
CategorySwitch
LanguageEnglish

Related product manuals