Intenso A10000 - Disposal; Operating Conditions; Technical Data

DISPOSAL
OPERATING CONDITIONS
Operate the device at 0 to 35 degrees Celsius and a maximum humidity of 85% (for a short me). If you do
not use your device for a longer period, store it at between -10 and 45 degrees Celsius at max. 90 % relave
humidity (for a short me) and charge this every three months to maintain full capacity.
TECHNICAL DATA
EN - Page 6 of 6
Dimensions: 95 x 63.5 x 24.5 mm
Power consumpon (Input):
USB-C In:
Normal: 5V-3A
Power Delivery: 5V- 3A, 9V- 2.22A, 12V- 1.67A (max. 20 wa)
Charging current delivery (Output):
USB-A Out:
Normal: 5V- 3A
Quick Charge: 5V- 3A, 9V- 2A, 12V- 1.5A (max. 18 wa)
USB-C Out:
Normal: 5V- 3A
Power Delivery: 5V- 3A, 9V- 2.22A, 12V- 1.67A (max. 20 wa)
USB-A + USB-C Out:
5V- 3A gesamt
Internal baery: 10000 mAh / 3.7V lithium polymer baery
Status display: 4 LED lights
Integrated overcharge protecon /
discharge protec- on / overvoltage
protecon / short circuit fuse:
Yes
Standby me: Up to 3 months
Disposal of old baeries:
The devices marked with this symbol are subject to the European Direcve 2006/66/EC
All old baeries must be disposed of separate from the municipal waste stream via desig-
nated collecon facilies appointed by the government or the local authories
You avoid environmental damage with the proper disposal.
Disposal of old electronic equipment:
The devices marked with this symbol are subject to the European Direcve 2012/19/
EC. All electrical appliances and old electrical appliances must be disposed of separate
from the municipal waste stream via designated collecon facilies appointed by the
government or the local authories. You avoid environmental damage with the proper
disposal of old electrical equipment.
Packaging:
Packaging is raw material. The packaging material of this product is suitable for recycling
and can be re-used. Please pay aenon to the local recycling provisions when disposing
of any materials.