Intenso BA2 - Disposal; Service;Distributor; Technical Specifications

SERVICE/DISTRIBUTOR
INTENSO INTERNATIONAL GMBH I Kopernikusstraße 12-14 I D-49377 Vechta
Email (technical support): support@intenso-internaonal.de
Email (RMA number): rma@intenso-internaonal.de
Internet: www.intenso.eu
Telephone (technical support): +49 (0) 4441 – 999 111
(Mon. – Thur. 09:00 – 16:30; Fri. 09:00 – 14:00)
DISPOSAL
OPERATING CONDITIONS
Operate the device at 0 to 35 degrees Celsius and a maximum humidity of 85%.
TECHNICAL SPECIFICATIONS
EN - Page 5 of 5
Disposal of old electronic equipment:
The devices marked with this symbol are subject to the European Direcve 2012/19/
EC. All electrical appliances and old electrical appliances must be disposed of separate
from the municipal waste stream via designated collecon facilies appointed by the
government or the local authories. You avoid environmental damage with the proper
disposal of old electrical equipment.
Packaging:
Packaging is raw material. The packaging material of this product is suitable for recycling
and can be re-used. Please pay aenon to the local recycling provisions when disposing
of any materials.
Dimensions (diameter/height), Weight: 96 mm / 6.6 mm, ~70 g
Power supply:
Quick charging power supply HP6B- 5V-3A, 9V-2.22A,
12V-1.67A, PD3.0, Quick Charge 3.0
Current consumpon (compable power
supplies):
9V-2A, 12V-1.5A, PD 3.0, QC 3.0 quick charge power
supply
Charging current output:
5, 7.5, 10 & 15 was (depending on the device being
charged)
Qi version: Version 1.2.4
Frequency band: 110–205 kHz
Max. radiated transming power: 15 was
Status display: LED light
Overvoltage protecon, overheang protec-
on, short-circuit protecon, foreign object
detecon
Yes
Case-friendly
Yes (depending on the material and thickness of the
case. Maximum 5 mm and no metal)