Intenso T300A - User guidelines; Bluetooth connection; Active Noise Cancelling (ANC); transparency mode; Music and gaming modes

1
EN - Page 4 of 9
When the buds are fully charged, the baery lasts for about 10 hours of music playback (depending
on volume, Bluetooth connecon and other factors). The charging box capacity is sucient to supply
the buds with around 2.5 charges, resulng in a total playback me of approx. 35 hours without a
power source.

When using the buds for the rst me, they must be paired with the playback device. As soon as the
buds are removed from the charging box, Bluetooth pairing mode is acvated. For details on pairing,
please refer to the operang instrucons of the playback device. With each subsequent use, the buds
automacally pair with the previously connected device. If you wish to pair with another device, ensu-
re the previous connecon is disconnected as the buds can only be connected to one device at a me.

This product features Acve Noise Cancelling (ANC) and transparency mode. ANC reduces back-
ground noise. The installed microphones pick up the ambient noise, processors in the earphones then
analyse the noise and measure what type of counter sound is required to neutralise it.
Transparency mode allows you to let ambient noise through while listening to music or other audio
content. Ambient noise is recorded by the microphones and reproduced in the earphones, for exam-
ple to be able to listen to loudspeaker announcements even though music is being played.
See the „Touch sensor“ secon for details of how to enable or disable ANC or transparency mode.
Music and gaming modes
You can switch between music mode and gaming mode during playback. Game mode has a lower
latency than music mode. While music mode is somewhat mellower in terms of sound. See the „Touch
sensor“ secon for details of how to switch between the two modes.

You can use the earphones as a speakerphone with your paired device. If the paired device supports
this funcon, you can answer, reject, and end calls. See the „Touch sensor“ secon for further infor-
maon on operaon.
Voice assistant
If your paired device has a voice assistant, this can be acvated using the earphones. See the „Touch
sensor“ secon for details of how to use this funcon.
EN - Page 5 of 9