MS-50BT/MS-50WT Heavy-Duty Monitor Speaker
Setup and Operation
Your MS-50BT/MS-50WT Heavy Duty Monitor Speakers can be placed on a table top or
other surface, or attach the speakers to a wall or other secure surface with the optional
FSB-1 mounting bracket.
WARNING: under no circumstances should any loudspeaker be mounted or suspended
in a public place unless the mounting method has been approved and certified by a
qualified engineer. Failure to properly secure the system can result in damage to the unit
or personal injury.
The MS-50BT/MS-50WT can operate at a rated input of 20W/4Ω, or in a 100V distributed
system.
6
To Next Page
Loading...
