PUBLIC ADDRESS AMPLIFIER
5
PA-2000A/4000A/6000A
8. CHIME BUTTON
Pressing this switch activates the one shot chime.
9. SIREN BUTTON
Pressing this button will activate the siren circuitry. Pressing it a second time will gradually lower the siren
signal, turning it off completely after approximately 2.5 seconds.
10. SPEAKER SELECTOR
These switches are used to select output to any combination of up to five individual speakers.
11. POWER SWITCH
Pressing this switch turns the unit on, as indicated by the Power LED above the switch. Pressing it again turns
the unit off.
To Next Page
Loading...
