Need help?Do you have a question about the Inter-m PA-6000A and is the answer not in the manual?
Explains symbols for dangerous voltage and important instructions, plus general safety advice.
Instructions to prevent electric shock and damage by keeping the unit away from water and moisture.
Numbered safety points covering reading instructions, keeping them, heeding warnings, and specific installation rules.
Steps for connecting power, setting controls, and confirming voltage before operating.
Instructions for turning the unit on and adjusting volume levels to avoid PEAK indicator.
Controls for adjusting gain (cut/boost) for specific frequency bands.
Indicates when the amplifier's protection circuitry is active due to issues like overheating.
A 10-segment LED meter showing the amplifier's output level in RMS.
Turns the unit on/off, with an indicator LED above the switch.
Connects the unit to the AC power outlet.
Allows worldwide use by selecting between 115V and 230V power sources.
Selects low impedance settings between 100V or 70V for speaker connections.
Instructions for connecting low-impedance speakers to the 4Ω terminals.
Instructions for connecting low-impedance speakers to the 8Ω terminals.
Guidance for connecting high-impedance systems using matching transformers.
Steps to diagnose problems, starting with operator error before contacting warranty provider.
Guidance on contacting Inter-M or distributors for specific warranty terms and service locations.
To Next Page
General
