2
PT-9107SD
STEREO TUNER
Unpacking
Please take a few minutes to read this manual to familiarize yourself with the important information regard-
ing installation, product features, and operation.
As with most electronic devices, ORIGINAL PACKAGING (OR EQUAL) IS REQUIRED in the unlikely event
that the product needs to be returned for servicing.
Short Form Instructions
1. Do not connect the AC power until step 4. The POWER switch should be in the OFF position.
2. Adjust the VOLUME control to the MIN Position (turn counter-clockwise).
3. Connect the desired OUTPUT (usually one of the variable outputs) to the input(s) of a mixer/amplifier
or other appropriate device.
4. With the power switch in the OFF position, plug in the supplied Universal AC power cord to the
product and an appropriate AC source.
5. Depress the power switch to the ON position. The power switch will illuminate.
6. Connect antennas and position them to receive the best reception.
7. The product is ready for operation. Slowly increase the VOLUME control to the desired operating
level.
8. Incorporate the Tuner’s remaining capabilities as desired.
PT-9107SD_E 2003.10.27 9:58 AM 페이지5
To Next Page
Loading...
Need help?
General
