RMX-1426 Multichannel Audio Mixer
7. Insert I/O
These unbalanced 1/4" TRS jacks are provided for input and output of an audio
source before the master fader. The Insert signal is unaffected by the Channel
Input levels.
8. PGM Outputs 1-4
Line-level outputs on unbalanced 1/4" phone connectors. These are provided for
output of signal routed to the PGM output busses.
9. Stereo Outputs L/R
Line-level outputs on unbalanced 1/4" phone connectors. These are provided for
output of signal routed to the Stereo L/R output busses.
10. Monitor Outputs
Line-level outputs on unbalanced 1/4" phone connectors. These are provided for
output of signal routed to the Monitor output busses.
11. AC Fuse Holder
This holder contains the AC overload protection fuse. If the fuse has blown out,
replace it with a fuse of the same type and rating. If the fuse continues to blow,
refer servicing to a qualified service technician.
12. AC Connector
Plug this cable into an active AC power supply.
13
To Next Page
Loading...
Need help?
General
