Inter-m RMX-1426 - Front Panel Controls - Channel Output Level; Channel Faders

RMX-1426 Multichannel Audio Mixer
When monitoring the channel’s input signal, PFL position allows you to hear the
input at a level unaffected by the position of the channel’s Output, FX Send and
Pan settings. AFL position will allow you to hear the input as it appears in the final
mix, with Output, FX Send and Pan settings as selected for the channel.
11. Channel Faders
These faders control the output level (the level sent to the output buss) for the
associated input channel. Faders on unused channels should be set to the
minimum setting.
9