SPEAKER LINE CHECKER
7
SC-6224
*'6'2*0
*'6'2*0
"!"!!
It is the terminal which connects the speaker line of 24 channels.
"!!
It is the terminal which connects the amp output of 24 channels.
!"!"!!
It is R-channel balance audio output terminal.
$$ !! $!
It sets up the error ranges for speaker line impedance.
- NARROW : 10%
- WIDE : 20%
"!!
It is the communication terminal to monitor the line check result from PC.
Link in is connected to the previous device, and Link out is connected to the next device.
!! $!
It is the switch which is set for stable data receiving/transmitting of link in/out.
For details of equipment setting, please refer to page 4
※CAUTION : communication error may occur if it is not set correctly.
Pin No. Functions Pin No. Functions
1 RS-485 Data - A 5 GND
2 RS-485 Data - B 6 RS-485 Data - Y
3 RS-485 Data - Z 7 NA
4 NA 8 NA
To Next Page
Loading...