Item No. 8105082 – 12/2013 Page 3 of 6
Creating new Protocols/Changing a Test Protocol Permanently
1. Click Menu | Setup | AC440 setup to enter the Main setup.
2. Click New to create a new test protocol.
3. A pop up window will appear, asking which settings to copy. Choose the protocol to be copied from the
drop down menu and re-name the new protocol. Click Apply.
4. The new protocol name will now appear in the list of protocols and it will now be possible to modify the
settings. Browse the options and amend as desired.
NOTE: For detailed setup options regarding each individual test available in the AC440, please refer to
the Affinity
2
and Callisto™ Additional Information documents.
5. When finished click OK (or Apply) to save the changes.
To Next Page
Loading...
Need help?
General
