AS608/AS608e Operation Manual Page10
Functions of Buttons & Display
The AS608/AS608e front plate:
Power Up and Power Off:
To turn on the audiometer press the Tone Switch (3) button. To
power off the audiometer hold down the two rotary wheel buttons, 1)
and 2), simultaneously for a few seconds. The audiometer will also
automatically power off after 1, 2, 3, 4 or 5 minutes depending on the
settings (see next section).
Pure Tone Presentation
1) Select desired frequency with the "Frequency" button
2) Select desired intensity with the HL dB.
3) Present tone by touching Tone Switch. An indication will be on
Display (see below).
To Next Page
Loading...
