AS608/AS608e Operation Manual Page27
Operating Temperature
Keep away from heat:
Do not site the AS608/AS608e next to a radiator or any
other heat source. Allow six inches between the back panel
and the wall to ensure proper ventilation.
Operating temperature: 15C- 35C/ 59-95F:
In operation the instrument should not be subject to
temperatures below 15C or above 35C/ below 59F or
above 95F.
If it has been exposed to abnormal low temperatures the
warm-up time must be respectively prolonged.
Care and Maintenance
The performance and reliability of the AS608/AS608e will be
prolonged if the following recommendations for care and
maintenance are adhered to:
Using an external power Supply e.g. ASA30M-0301 - Turn the
switch to the off position.
Great care when handling the headset:
Great care should be exercised when handling the headset as
dropping it may alter the calibration.
Annual calibration headset:
The AS608/AS608e has been designed to provide many
years of reliable service, but annual calibration is
recommended.
We do also recommend to calibrate the AS608/AS608e if
something drastic happens to part of it (e.g. headset is
dropped).
To Next Page
Loading...
