InterAct Accessories Quantum FighterPad

To Next Page

Quantum FighterPad

I-22-009

INTRODUCTION

Thank you for purchasing the Quantum FighterPad™ for the Sega Dreamcast™ Entertainment

System. The Quantum FighterPad features a thumb-control analog mini-stick, digital directional

pad, 6 digital fire buttons on the controller face, 2 analog shoulder buttons, programmability and

auto-fire. The Quantum FighterPad has LED indicators to aid in programming and for setting

auto-fire.

Your Quantum FighterPad package should include the Quantum FighterPad, instruction manual,

registration card and warranty card. If you are missing any of these items, please contact

InterAct Accessories Customer Service at (410) 785-4064. Please take this time to fill out your

registration card so you can receive updates and information about new products from InterAct.

CONTENTS

• PRODUCT DESCRIPTION

• FUNCTION DESCRIPTION

• AUTO FIRE

• PROGRAMMING METHOD

• TROUBLE SHOOTING & CARE FOR THE UNIT

PRODUCT DESCRIPTION

1. Thumb-controlled analog stick for 3D directional control.

2. Thumb controlled digital pad (←,↑,→,↓) for directional control.

3. Six fire buttons (X, Y, Z, A, B, C). Fire Buttons X, Y, A, B are the four standard buttons of a

Conventional Dreamcast controller. Fire Buttons Z and C are extra, they are set as X and A.

4. Two analog buttons (L, R). These buttons are not programmable.

5. PROGRAM button, which activates the programming function. Pressing the PROGRAM button

will cause to the PROGRAM LED to start flashing. Pressing it again will turn off the PROGRAM

function.

6. AUTO button, which sets the auto-fire function

7. START button for starting or pausing games. Aside from starting and pausing a game, START

is also used as a "space" when programming a sequence of fire buttons. (e.g. combination

moves)

8. Visual Memory Card and Rumble Pak slot.

FUNCTION DESCRIPTION

AUTO-FIRE - The AUTO button activates the auto-fire function. The auto-fire function can be

set to individual fire buttons. To assign or remove auto-fire from a button, simply press the AUTO

button and the button you wish to assign or remove auto-fire from.

During normal game play, the AUTO LED serves to indicate that:

Main Page

Need help?

Do you have a question about the InterAct Accessories Quantum FighterPad and is the answer not in the manual?

Summary

Product Description

Thumb-Controlled Analog Stick

Features a thumb-controlled analog stick for 3D directional control.

Thumb-Controlled Digital Pad

Features a thumb-controlled digital pad (←,↑,→,↓) for directional control.

Fire Buttons

Six digital fire buttons (X, Y, Z, A, B, C) for gameplay actions.

Analog Shoulder Buttons

Two analog buttons (L, R) for additional control inputs.

PROGRAM Button

Activates the programming function, indicated by a flashing PROGRAM LED.

AUTO Button

Sets and activates the auto-fire function for buttons.

START Button

Used for starting/pausing games and as a 'space' during programming.

Memory Card & Rumble Pak Slot

Provides a slot for Visual Memory Cards and Rumble Paks.

Function Descriptions

Auto-Fire Function

Activates auto-fire by pressing AUTO and desired fire button; AUTO LED indicates status.

Programming Methods

Programming Procedures

Step-by-step guide to program buttons, including activation and completion.

Advanced Programming Techniques

Enables setting button-hold time and no-button time for complex moves.

Programming Hold Button

How to program a button to be held while pressing others for special moves.

Programming No-Button Time

Defines programmable 'space' or idle periods between button presses.

Button Operations and Maintenance

Default Button Reset

Resets all programmed buttons to their original default settings.

Reprogram Each Button

Procedure to reprogram individual buttons to their original default function.

Care and Troubleshooting

Guidelines for handling, maintenance, and common issues with the controller.