To Next PageTo Next Page
Need help?Do you have a question about the Interlogix ATS1521N and is the answer not in the manual?
General| Brand | Interlogix |
|---|---|
| Model | ATS1521N |
| Category | Fire Alarms |
| Language | English |
Identifies the front cover of the module.
Shows the arrangement of components on the module.
Refers to the back plate of the module.
Indicates the position for the locking screw.
Identifies the speaker component.
Refers to the connector for the speaker.
Highlights the DIP switch for setting the address.
Details the speaker volume adjustment control.
Details the microphone volume adjustment control.
Identifies the Heartbeat LED indicator.
Refers to the TERM jumper for bus termination.
Identifies the internal tamper switch.
Refers to the jumper controlling the microphone LED.
Refers to the jumper for tamper signal reception.
Identifies the microphone component.
Identifies the microphone LED indicator.
Identifies the earth terminal (CON8).
Refers to terminals for ATS1522N bus and audio.
Identifies the system databus connection.
Identifies the mounting holes.
Identifies the hole for pry-off detection.
Configures bus termination on the device.
Enables or disables the microphone LED.
Receives tamper signals from slave satellites.
Indicates the satellite's operational status.
Connects the audio bus for communication.
Connects to the Advisor Advanced control panel.
Connects up to three ATS1522N satellites.
